Cases

Modernization of daily silos at brewhouse

This project was delivered based on «turn key» approach and included next phases:
  • Design works of technology including development of P&Ds;
  • Supply of equipment;
  • Installation works;
  • Integration into existing control system SCADA of brewhouse;
  • Start-up and commissioning.
Modernization included dismantling of old silos, installation of new silos for malt and barley. Supply of cleaning equipment that takes out metal, stones and other foreign bodies. After malt and barley are delivered by transporters to existing hammer mill.
For each type of grain (3 types of malt and barley) it was foreseen separate silo. Grain is delivered to silos using pneumatic transport. Supply is regulated with diverters and gate valves. Capacity of silos is sufficient for 1 day of production required for brewhouse. Grain via pneumatic transport is supplied to cyclone feeders equipped with rotary valves. Distribution of flow to each silo is organized with automatic valves.
All silos (bunkers) are equipped with level sensors of upper limit and actual level.
Transporters are supplied with all safety sensors: overflow, rotation, belt alignment.
Aspiration is supplied from European produced Cipres Filtr - https://www.cipres.cz/en/that is installed on chain conveyor.
Bucket elevators are supplied with membranes connected to explosion relief channels. All components have ATEX certificates.
Modernization Brewery