VARIVENT® CONSTANT PRESSURE VALVE

Function

As soon as the product pressure operating on the ring face of the valve disc is higher than the closing force set through the air supply pressure of the piston, the VARIVENT® constant pressure valve opens. If the product pressure decreases, the valve automatically closes and creates a constant pressure in the inlet nozzle.

Additionally the lower part of the valve disc is provided with a control cone to optimize the valve characteristics.

The valve disc of the constant pressure valve is made of PTFE, which has a good resistance against aggressive media and only has a low friction during the movement.

Special Features

Mechanically stops of the valve disc
PTFE valve disk with low friction
Easy maintenance, only two gaskets
Good control characteristics
Different Kvs-values depending on the flow rate
Hygienic design
3A certified

Application Examples

In practice VARIVENT® constant pressure valves are used to keep a constant product pressure at the outlet of a separator. At this juncture the self-regulating VARIVENT® constant pressure valve is a lower priced alternative to a modulating control valve. Since the valve operates automatically after setting the demanded product pressure, no additional pressure transmitter is necessary.

The VARIVENT® constant pressure valve is additionally used to keep the demanded product pressure in heat exchangers.

Extra Equipment

The valve can optionally be equipped with a quick-air-exhaust or a precision pressure regulator. Via the supply- or exhaust air quantity a precise setting of the air supply pressure above the piston surface is possible, which allows the regulation of the demanded constant product pressure at the inlet side of the valve.

Picture 1 (left): The PTFE valve disk is raised by the product flow

Picture 2 (right): Quick air exhaust valve with noise dampener

Technical Data

Contant Pressure Valve

Technical Data of the Standard Version

Recommended flow direction: From top to bottom

Housing material: 1.4404 / AISI 316 L

Valve disc material: PTFE (FDA)

Seal material in contact with the produc: EPDM, FKM , HNBR

Ambient temperature: 0 to 45°C

Air supply pressure: Max. 8 bar (116 psi)

Product pressure: Max. 10 bar (145 psi)

Surface in contact with the product: Ra ≤ 0,8 μm

External housing surface: Matte blasted

Control and feedback system: Connection 0 (without control top)

Actuator type: Pneumatic actuator air / spring

Connection fittings: Welding end

Identification: Adhesive ID tag