Home
GEA cleaning technology
ACCESSORIES CLEANERS

GEA cleaning technology

ACCESSORIES CLEANERS

ACCESSORIES CLEANERS

Order

Cleaning Lances

There are three different versions of cleaning lances available:

Cleaning lances with or prepared for a static cleaner (spray-ball)
Cleaning lances with or prepared for a rotating cleaner
Cleaning lances with or prepared for an orbital cleaner

Remark:
Tank dimensions, tank design and the intended use of the tank must be taken into consideration for the determination of the spray ball type, installation depths and clearance.
Material: 1.4404/316L

GEA recommends installing the dirt arrester in the CIP supply line close to the tank washer to protect it against particulate blocking or damage. Consequently downtimes of the cleaning devices can be avoided.

Nominal sizes

DN 25 / G1″ BSP

DN 50 / G2″ BSP

DN 80 / G3″ BSP

Connection: G-G DIN 11851

Filter gauze: 0,5 mm

Material: 1.4404

From now on the orbital cleaners Typhoon, Tempest and Tornado are available with the new protection cage as an option. This protection cage helps to prevent nozzle damages caused by inserting and removing the cleaners into or from vessels. Due to the special design there are demonstrably no shadow areas while cleaning.

A mobile or stationary trestle is available for our cleaners 1″ or 11/2″ connection.

Leave your contact information

And we will contact you as soon as possible

Manual CIP washing

Select parameters and order CIP

Development of process flow diagram, 1000€ (P&ID scheme of CIP station; Composition solutions of location; List of instrumentation, signals for development of HQ) Development of 3D model, 1500€ (Scan objects with FARO S150 laser; Create point cloud; Form digital prototype of object with SolidWork or Revit software) Chief assembly, 8000€ (Mechanical assembly of CIP) Commissioning, set-up, 1500€ (Dry testing of the equipment; Calibration of sensors; Testing of the station at medium supply; Manual start-up of the CIP; Commissioning of the equipment in automatic mode) Warranty service, 2000 € (Carried out remotely by Viravix Engineering during the warranty period of the equipment)

Total:

Supply (+15% of the cost of components)

Pumps, valves, instrumentationControl cabinet and wiring materialsPipe materials, insulationBy submitting an application, you agree to privacy policy

Automatic multi-circuit CIP

Select parameters and order CIP

Collection of initial data and drafting of TOR (or according to the completed questionnaire free of charge)Development of technological scheme (P&ID scheme of CIP station; Composition solutions of location; List of instrumentation, signals for HQ development)3D model development (Scan objects using FARO S150 laser; Create point cloud; Form digital prototype of the object using SolidWork or Revit software).Software for HQAssembly (Mechanical assembly of CIP)Commissioning, adjustment (Carrying out dry tests of the equipment; Calibration of sensors; Testing of the station at the supply of media; Manual start-up of CIP; Commissioning of the equipment in automatic mode)Warranty service (Performed remotely by Viravix Engineering during the warranty period of the equipment).

The final cost of an automatic multi-circuit CIP station depends on the complexity of the project. Describe your task and attach a link to the task as a file. Our specialists will reply to you during working hours.

By submitting an application, you agree to privacy policy