Home
GEA centrifuges & separation equipment
CLARIFYING DECANTERS FOR EDIBLE OIL REFINING

GEA centrifuges & separation equipment

CLARIFYING DECANTERS FOR EDIBLE OIL REFINING

CLARIFYING DECANTERS FOR EDIBLE OIL REFINING

Order

The decanter separates the solids from the oil in fully continuous operation. Solids are discharged continuously which results in a continuous solids recycling into the press.
Using a decanter combines foots removal with partial degumming, in case of chemical refining the result of this combination of two process steps is often sufficient. On top, GEA decanters are easy to operate and automate and they need only little space. With their robust design our decanters can handle oil temperatures of up to 105° C. The external gears which segregates product from drive room, oil lubrication of all bearings, special materials and high quality wear make our GEA ecoforce decanters especially suited for hot applications and continuous heavy duty.

Continuous solids separation
Low cost of automation
Lower space requirement
Simultaneous degumming
Rugged and robust design
External gear concept of GEA ecoforce decanters
Oil lubrication of all bearings

Leave your contact information

And we will contact you as soon as possible

Manual CIP washing

Select parameters and order CIP

Development of process flow diagram, 1000€ (P&ID scheme of CIP station; Composition solutions of location; List of instrumentation, signals for development of HQ) Development of 3D model, 1500€ (Scan objects with FARO S150 laser; Create point cloud; Form digital prototype of object with SolidWork or Revit software) Chief assembly, 8000€ (Mechanical assembly of CIP) Commissioning, set-up, 1500€ (Dry testing of the equipment; Calibration of sensors; Testing of the station at medium supply; Manual start-up of the CIP; Commissioning of the equipment in automatic mode) Warranty service, 2000 € (Carried out remotely by Viravix Engineering during the warranty period of the equipment)

Total:

Supply (+15% of the cost of components)

Pumps, valves, instrumentationControl cabinet and wiring materialsPipe materials, insulationBy submitting an application, you agree to privacy policy

Automatic multi-circuit CIP

Select parameters and order CIP

Collection of initial data and drafting of TOR (or according to the completed questionnaire free of charge)Development of technological scheme (P&ID scheme of CIP station; Composition solutions of location; List of instrumentation, signals for HQ development)3D model development (Scan objects using FARO S150 laser; Create point cloud; Form digital prototype of the object using SolidWork or Revit software).Software for HQAssembly (Mechanical assembly of CIP)Commissioning, adjustment (Carrying out dry tests of the equipment; Calibration of sensors; Testing of the station at the supply of media; Manual start-up of CIP; Commissioning of the equipment in automatic mode)Warranty service (Performed remotely by Viravix Engineering during the warranty period of the equipment).

The final cost of an automatic multi-circuit CIP station depends on the complexity of the project. Describe your task and attach a link to the task as a file. Our specialists will reply to you during working hours.

By submitting an application, you agree to privacy policy