GEA valves
ECOVENT® SHUT-OFF VALVES
In the simple shut-off, there is only one seal in the one piece valve disc separating the pipelines from one another. This means liquid can pass from one pipeline to the other in the eventuality of a seal defect. For this reason, single-seat shut-off valves are not suitable for separating incompatible products.
Technical Data of the Standard Version
Recommended flow direction | from bottom to top |
Material in contact with the product | 1.4404 / AISI 316 L |
Material not in contact with the product | 1.4301 / AISI 304 |
Seal material in contact with the produc | EPDM, FKM, HNBR |
Ambient temperature | 0 to 45 °C |
Air supply pressure | 6 bar (87 psi) |
Product pressure | 5 bar (73 psi) |
Surface in contact with the product | Ra ≤ 0.8 μm |
External housing surface | matte blasted |
Control and feedback syste |
connection 0 (without control top) |
Actuator type |
pneumatic actuator air / spring |
Connection fittings |
welding end |
Identification |
adhesive ID tag |
Valve seat version |
clamped or welded seat ring |
Certificates |
A3, CE |
Valve Selection Scheme: from Bottom to Top: from Bottom to Top
Feature: Compact Design: Small Nominal Width DN 10 or DN 15
Type: Single-seat Valve, Type N/ECO: Single-seat Valve, Type N/ECO small
In practical use, these valves are used
Sizes
The ECOVENT® small valve type N / ECO in nominal widths DN 10 or DN 15 is predominantly used as a feed valve for supplying the spray cleaning of double-seat valves.
And we will contact you as soon as possible