Home
GEA valves
VARIVENT® SAMPLING VALVE T/09

GEA valves

VARIVENT® SAMPLING VALVE T/09

VARIVENT® SAMPLING VALVE T/09

Order

VARIVENT® SAMPLING VALVE T/09

This valve recommends itself for use in automatic sampling systems and dosing functions, as it can easily be fitted to a tank wall or be connected to a standard VARINLINE® housing. The big advantage of this mixproof sampling valve is that the sampling line can be cleaned and sterilized after sampling, while the production process in the associated tank or connected pipe can continue unhindered.

Enables fully automatic sampling
Fully drainable also in horizontal position
Small, compact and lightweight
Bottom-flush shut-off without gaps and pockets
Very easy to maintain
CIP/SIP of sampling pipe is possible whilst production process in the tank

Material in contact with the product	1.4404 / AISI 316L
Material not in contact with the product	1.4301/AISI 304
Seal material in contact with the product	EPDM, FKM
Control air pressure	min. 6 bar
Product pressure	max. 8 bar
Surface in contact with the product	Ra<0.8 μm
Surface finish outside	matte

Leave your contact information

And we will contact you as soon as possible

Manual CIP washing

Select parameters and order CIP

Development of process flow diagram, 1000€ (P&ID scheme of CIP station; Composition solutions of location; List of instrumentation, signals for development of HQ) Development of 3D model, 1500€ (Scan objects with FARO S150 laser; Create point cloud; Form digital prototype of object with SolidWork or Revit software) Chief assembly, 8000€ (Mechanical assembly of CIP) Commissioning, set-up, 1500€ (Dry testing of the equipment; Calibration of sensors; Testing of the station at medium supply; Manual start-up of the CIP; Commissioning of the equipment in automatic mode) Warranty service, 2000 € (Carried out remotely by Viravix Engineering during the warranty period of the equipment)

Total:

Supply (+15% of the cost of components)

Pumps, valves, instrumentationControl cabinet and wiring materialsPipe materials, insulationBy submitting an application, you agree to privacy policy

Automatic multi-circuit CIP

Select parameters and order CIP

Collection of initial data and drafting of TOR (or according to the completed questionnaire free of charge)Development of technological scheme (P&ID scheme of CIP station; Composition solutions of location; List of instrumentation, signals for HQ development)3D model development (Scan objects using FARO S150 laser; Create point cloud; Form digital prototype of the object using SolidWork or Revit software).Software for HQAssembly (Mechanical assembly of CIP)Commissioning, adjustment (Carrying out dry tests of the equipment; Calibration of sensors; Testing of the station at the supply of media; Manual start-up of CIP; Commissioning of the equipment in automatic mode)Warranty service (Performed remotely by Viravix Engineering during the warranty period of the equipment).

The final cost of an automatic multi-circuit CIP station depends on the complexity of the project. Describe your task and attach a link to the task as a file. Our specialists will reply to you during working hours.

By submitting an application, you agree to privacy policy